Leading 10 common forklift accidents ， forklift operation should pay attention to these matters ！.
Leading 10 common forklift accidents ， forklift operation should pay attention to these matters ！.
Blog Article
Do not underestimate the forklift at the workplace. If the operation is bad, there will certainly be major crashes in minutes, and there are several mishaps involving forklifts.
Case 1: The forklift cargo obstructed the chauffeur's view, and the person ahead can not be discovered, leading to a moving crash.
Case 2: In order to preserve the balance of the forklift when lifting heavy goods, the employees used their body weight as the counterweight, which almost triggered casualties.
Instance 3: The width of the forklift freight goes beyond the allowable size of the course and holds on the roadside shelf, which nearly creates an mishap.
Instance 4: Forklift is speeding up and surrender during a turn.
Situation 5: The forklift motorist did not notice the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift raises the workers unlawfully, the forklift chauffeur does not use the safety belt, the forklift lifter drops and the driver is squashed when the forklift surrender.
Situation 7: The forklift driver did not put on a seat belt and dropped from the vehicle when it rolled over and was crushed.
Forklift procedure must take note of these matters ：.
Start.
1. Prior to starting, observe the environments, and after verifying that there are no obstacles that prevent the safety of driving, honk the horn initially and after that begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale have to be secure before beginning.
3. When the forklift begins with a lots, the driver must first validate that the tons is steady and reliable.
4. The begin has to be sluggish and constant.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the pole must be tilted backward. .
2. Do not lift the fork expensive when driving. When getting in and leaving the work site or while driving, be careful that there will be no barriers in the sky. When the lots is traveling, the fork must not be raised too high, which will affect the security of the forklift. .
3. After dumping, the fork needs to be reduced to the normal driving position prior to driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal should be issued first. High-speed sharp turns are prohibited. High-speed doglegs will certainly create the lorry to shed side stability and tip over. .
5. When the forklift is downhill, it is strictly restricted to switch off the fire and slide, and it is forbidden to brake suddenly while driving with tons unless there are special situations.
6. When the forklift is running, it must comply with the traffic rules in the manufacturing facility and need to keep a specific safety range from the automobile in front. .
7. When the forklift is running, the tons has to be in the most affordable position that does not impede the driving, and the gantry needs to be appropriately tilted back. The lots will not be raised except when piling or filling. .
8. The height of the tons must not block the motorist's view. In unique situations, when the product influences the forward vision, drive at a reduced rate when reversing.
9. It is restricted to activate the ramp, neither to drive throughout the ramp. .
10. The safe driving speed of the forklift in the factory area is 5 km/h, and it should drive securely at a low speed when entering the manufacturing workshop area. .
11. When the forklift is lifted, raised or driven, it is forbidden for personnel to base on the fork to hold things and play a balancing role. .
12. If troubles are located, they will certainly be repaired and reported in a prompt fashion, and they will certainly never ever run with health problems or conceal them.
loading and discharging.
1. When fork-loading products, the range in between the two forks must be adjusted as required to make the lots of both forks well balanced and not skewed, and one side of the item must be against the rack. .
2. It is prohibited to deal with a single fork or use a fork top or draw. In unique conditions, safety and security warning signs need to be established to advise bordering pedestrians. .
3. In the process of filling and discharging items, the forklift must be stopped with the brake. .
4. The rate of the lorry must be slow-moving and steady. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and harm people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible under the lots, and it must be kept in mind that the fork pointer must not touch other goods or items. The load ought to be stabilized with very little back tilt of the gantry so that the tons does not glide backwards. The mast can be tilted forward somewhat when the lots is lowered to enable very easy positioning of the load and extraction of the forks. .
6. It is prohibited to fork items at high speed and collide with tough things with the fork head. .
7. When the forklift is working, it is forbidden for individuals to stand around the fork, so regarding stay clear of the collapse of the goods and harm individuals. .
8. Overloading is banned, and it is restricted to utilize forks to lift personnel to participate in high-altitude procedures to prevent high-altitude falling mishaps. .
9. It is not allowed to make use of the brake inertia to slip, place, round or roll items. .
10. It is not allowed to make use of forks to choose, transform pallet discharge.
Leaving .
1. It is restricted to leave the forklift when the things on the fork are in the air. Before leaving the forklift, you must unload the goods or lower the fork structure.
2. Pull the parking brake deal with to dead or dispirit the hand brake switch.
3. The engine is switched off and the power is removed. (Except for unique situations, such as the chauffeur does not leave the automobile's line of vision and does not go beyond 1 min).
4. Eliminate the secret. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance should be checked, and gas, lubing oil and air conditioning water must be added.
2. Check the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature are regular.
5. After the forklift is running, the outside leakage should additionally be examined and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You must examine before leaving the automobile;.
2. When you experience someone before you during driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming must not be too sharp to stop the tendency of "free Electric Forklift Truck for Warehouse switching";.
6. Running up and down the incline ought to be slow and consistent, and no turning on the incline is allowed.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the lorry ought to be driven in reverse when declining;.
8. When the forklift employees bring the goods and move on, if they experience huge Stand-on Electric Pallet Stacker or heavy items and go to the motorist's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Single fork operation is not permitted.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not permitted to use braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same size as the barrier should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844